PowerBondModel: PowerBond - Starting at: £5.76
PowerBond is a neutral cure, high modulus, solvent-free, one part, moisture cure, adhesive based on Hy-Spec hybrid technology. Very high green strength with a high initial tack and quickly cures to a permanently flexible and durable compound, suitable for almost all bonding applications.
PowerBond sticks to almost anything including; unprimed metals, aluminium, steel, composite panels, wood, glass, plastics, concrete, mortar, plaster, epoxy and polyester coated panels, polycarbonate, PU, stainless steel, anodised aluminium, copper, zinc, lead, finished wood and polystyrene.
For factory, on-site or remedial applications. Bonding of decorative frames, skirting boards, insulation panels, cable ducts.
- Unbelievably high bond strength
- Solvent & Isocyanate free
- High green strength and initial tack
- Can replace mechanical fixings
- Fast cure
- Permanently flexible/elastic
- Can be used on damp surfaces
- Suitable for internal or external use
- Good adhesion to most surfaces
- Weatherable and UV stable
- Low odour and no shrinkage
Application temperature range: + 5°C to + 40°C
Shelf life: 18 months
Skinning time: 15-25 minutes
Working time: <15 minutes
Joint design: Please consult the Technical Information Sheet entitled ‘Joint design for cartridge-based products’ prior to application.
Surface preparation: All surfaces must be clean, dry and free from frost, grease and loose materials. Apply primer if required. Most substrates only require priming if testing indicates it is needed. Apply using a skeleton gun into the joint ensuring good contact with surfaces. In situations where an especially neat finish is required, use masking tape to cover the face edges of the joint and remove immediately once tooling has been completed. Fixings may be required in some cases. Please check before purchasing.
Tooling: Tool immediately after application, within the working time for the product