FREE DELIVERY
For orders over £199 exc VAT
NEXT DAY DELIVERY
On all orders before 4pm
Lorient LAS8003 SI Automatic Drop Down Seal – 935mm
Product Information£42.96 EXC. VAT
FREE DELIVERY
For orders over £199 exc VAT
NEXT DAY DELIVERY
On all orders before 4pm
Lorient's LAS8003 si is a slimline, face-fixed or semi-mortised automatic drop seal. It features a high-efficiency mechanism that lifts the seal clear of the floor as soon as the door is opened by a few millimetres, resulting in lower door operating forces. This is designed to be surface-mounted which is suitable for upgrading existing doors.
This needs no power connection and is self-levelling on uneven floors. The seal height can be adjusted independently of any fixing screws.
Features & Benefits
- Silver anodised aluminium with grey end plates and grey silicone rubber gasket
- Minimum/maximum gap size: 1mm/13mm
- Self-levelling on uneven surfaces
- Meets smoke requirement: BS 9999: 2017
- Surface mounted application suitable for upgrading existing doors and fire doors
- Durability: 1 million cycles
- UL: R27972
Areas of Application
Single swing, single and double leaf doors. For use on both right and left handed doors
Certifire Certificate
CF5179
Acoustic Rating
BS EN ISO 10140-2: 2010 (up to Rw 33dB)
Smoke Rating
BS 476-31.1:1983
Sorry, there are no items available
Can drop down seals be cut to fit the width of a door?
Yes, many drop-down seals and automatic drop seals can be trimmed to suit the width of the door during installation. The amount that can be cut will vary depending on the specific seal model and design. For detailed trimming allowances, fitting instructions and installation guidance, please refer to the product datasheet for the particular drop seal you are installing. Following the manufacturer's instructions will help ensure the seal continues to perform as intended for acoustic, smoke and fire door applications.
Do drop seals 'Self Level'?
Yes, Drop Seals self level to the floor's surface. Threshold plates can be ued to create an aesthetic finish or provide a flat contact area on uneven and irregular floors surfaces.
Do drop down seals need to be used with a threshold plate?
No, drop-down seals and automatic drop seals do not necessarily require a threshold plate to function correctly. Whilst many drop seals are fire tested and acoustically tested with threshold plates, a threshold plate is not always required, depending on the application, floor finish and performance requirements. Threshold plates can help provide a consistent sealing surface and may improve acoustic, smoke or sealing performance in certain installations. Always refer to the product datasheet, fire test evidence and installation guidance to determine the most suitable configuration for your door set.
Lorient's LAS8003 si is a slimline, face-fixed or semi-mortised automatic drop seal. It features a high-efficiency mechanism that lifts the seal clear of the floor as soon as the door is opened by a few millimetres, resulting in lower door operating forces. This is designed to be surface-mounted which is suitable for upgrading existing doors.
This needs no power connection and is self-levelling on uneven floors. The seal height can be adjusted independently of any fixing screws.
Features & Benefits
- Silver anodised aluminium with grey end plates and grey silicone rubber gasket
- Minimum/maximum gap size: 1mm/13mm
- Self-levelling on uneven surfaces
- Meets smoke requirement: BS 9999: 2017
- Surface mounted application suitable for upgrading existing doors and fire doors
- Durability: 1 million cycles
- UL: R27972
Areas of Application
Single swing, single and double leaf doors. For use on both right and left handed doors
Certifire Certificate
CF5179
Acoustic Rating
BS EN ISO 10140-2: 2010 (up to Rw 33dB)
Smoke Rating
BS 476-31.1:1983
Sorry, there are no items available
Can drop down seals be cut to fit the width of a door?
Yes, many drop-down seals and automatic drop seals can be trimmed to suit the width of the door during installation. The amount that can be cut will vary depending on the specific seal model and design. For detailed trimming allowances, fitting instructions and installation guidance, please refer to the product datasheet for the particular drop seal you are installing. Following the manufacturer's instructions will help ensure the seal continues to perform as intended for acoustic, smoke and fire door applications.
Do drop seals 'Self Level'?
Yes, Drop Seals self level to the floor's surface. Threshold plates can be ued to create an aesthetic finish or provide a flat contact area on uneven and irregular floors surfaces.
Do drop down seals need to be used with a threshold plate?
No, drop-down seals and automatic drop seals do not necessarily require a threshold plate to function correctly. Whilst many drop seals are fire tested and acoustically tested with threshold plates, a threshold plate is not always required, depending on the application, floor finish and performance requirements. Threshold plates can help provide a consistent sealing surface and may improve acoustic, smoke or sealing performance in certain installations. Always refer to the product datasheet, fire test evidence and installation guidance to determine the most suitable configuration for your door set.